Version information
released Nov 12th 2024
This version is compatible with:
- Puppet Enterprise 2023.8.x, 2023.7.x, 2023.6.x, 2023.5.x, 2023.4.x, 2023.3.x, 2023.2.x, 2023.1.x, 2023.0.x, 2021.7.x, 2021.6.x, 2021.5.x, 2021.4.x, 2021.3.x, 2021.2.x, 2021.1.x, 2021.0.x, 2019.8.x
- Puppet >= 6.23.0 < 9.0.0
- , , , , ,
Tasks:
- audit_partition_crypto
- audit_approved_services_listening
- audit_authselect
- audit_boot
Documentation
puppetlabs/sce_linux — version 2.2.1 Nov 12th 2024
sce_linux
Product documentation is available on the Puppet Docs website.
SCE for Linux Reference
Table of Contents
- CIS CentOS Linux 7 Benchmark 3.1.2
- CIS Red Hat Enterprise Linux 7 Benchmark 4.0.0
- Red Hat Enterprise Linux 7 Security Technical Implementation Guide 3
- CIS Red Hat Enterprise Linux 8 Benchmark 3.0.0
- Red Hat Enterprise Linux 8 Security Technical Implementation Guide 1
- CIS Red Hat Enterprise Linux 9 Benchmark 1.0.0
- CIS Oracle Linux 7 Benchmark 4.0.0
- CIS Oracle Linux 8 Benchmark 3.0.0
- CIS Oracle Linux 9 Benchmark 1.0.0
- CIS AlmaLinux OS 8 Benchmark 3.0.0
- CIS Rocky Linux 8 Benchmark 2.0.0
- CIS Ubuntu Linux 20.04 LTS Benchmark 2.0.1
- CIS Ubuntu Linux 22.04 LTS Benchmark 2.0.0
- List of known CIS control sections that use plans and tasks:
CIS CentOS Linux 7 Benchmark 3.1.2
1.1.1.1 - Ensure mounting of cramfs filesystems is disabled
Parameters:
filesystem- [String[1]] - Default:cramfs- Filesystem to disable, example xfs.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure mounting of cramfs filesystems is disabled":
filesystem: "cramfs"
Alternate Config IDs:
1.1.1.1c1_1_1_1ensure_mounting_of_cramfs_filesystems_is_disabled
Resource:
Sce_linux::Utils::Disable_fs_mounting['Disable cramfs filesystem mounting']
1.1.1.2 - Ensure mounting of squashfs filesystems is disabled
Parameters:
filesystem- [String[1]] - Default:squashfs- Filesystem to disable, example xfs.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure mounting of squashfs filesystems is disabled":
filesystem: "squashfs"
Alternate Config IDs:
1.1.1.2c1_1_1_2ensure_mounting_of_squashfs_filesystems_is_disabled
Resource:
Sce_linux::Utils::Disable_fs_mounting['Disable squashfs filesystem mounting']
1.1.1.3 - Ensure mounting of udf filesystems is disabled
Parameters:
filesystem- [String[1]] - Default:udf- Filesystem to disable, example xfs.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure mounting of udf filesystems is disabled":
filesystem: "udf"
Alternate Config IDs:
1.1.1.3c1_1_1_3ensure_mounting_of_udf_filesystems_is_disabled
Resource:
Sce_linux::Utils::Disable_fs_mounting['Disable udf filesystem mounting']
1.1.3 - Ensure noexec option set on /tmp partition
Parameters:
noexec- [Boolean] - Default:true- Set noexec mount option
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure noexec option set on /tmp partition":
noexec: true
Alternate Config IDs:
1.1.3c1_1_3ensure_noexec_option_set_on_tmp_partition
Resource:
Class['sce_linux::utils::tmp_mount']
1.1.4 - Ensure nodev option set on /tmp partition
Parameters:
nodev- [Boolean] - Default:true- Set nodev mount option
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure nodev option set on /tmp partition":
nodev: true
Alternate Config IDs:
1.1.4c1_1_4ensure_nodev_option_set_on_tmp_partition
Resource:
Class['sce_linux::utils::tmp_mount']
1.1.5 - Ensure nosuid option set on /tmp partition
Parameters:
nosuid- [Boolean] - Default:true- Set nosuid mount option
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure nosuid option set on /tmp partition":
nosuid: true
Alternate Config IDs:
1.1.5c1_1_5ensure_nosuid_option_set_on_tmp_partition
Resource:
Class['sce_linux::utils::tmp_mount']
1.1.7 - Ensure noexec option set on /dev/shm partition
Parameters:
noexec- [Boolean] - Default:true- Whether to set the noexec option.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure noexec option set on /dev/shm partition":
noexec: true
Alternate Config IDs:
1.1.7c1_1_7ensure_noexec_option_set_on_devshm_partition
Resource:
Class['sce_linux::utils::dev_shm_fstab_entry']
1.1.8 - Ensure nodev option set on /dev/shm partition
Parameters:
nodev- [Boolean] - Default:true- Whether to set the nodev option.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure nodev option set on /dev/shm partition":
nodev: true
Alternate Config IDs:
1.1.8c1_1_8ensure_nodev_option_set_on_devshm_partition
Resource:
Class['sce_linux::utils::dev_shm_fstab_entry']
1.1.9 - Ensure nosuid option set on /dev/shm partition
Parameters:
nosuid- [Boolean] - Default:true- Whether to set the nosuid option.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure nosuid option set on /dev/shm partition":
nosuid: true
Alternate Config IDs:
1.1.9c1_1_9ensure_nosuid_option_set_on_devshm_partition
Resource:
Class['sce_linux::utils::dev_shm_fstab_entry']
1.1.22 - Ensure sticky bit is set on all world-writable directories
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.1.22c1_1_22ensure_sticky_bit_is_set_on_all_world_writable_directories
Resource:
Class['sce_linux::utils::sticky_bit']
1.1.23 - Disable Automounting
Parameters:
service- [String[1]] - Default:autofs- Service to disable.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Disable Automounting":
service: "autofs"
Alternate Config IDs:
1.1.23c1_1_23disable_automounting
Resource:
Sce_linux::Utils::Disable_service['Disable autofs']
1.1.24 - Disable USB Storage
Parameters:
filesystem- [String[1]] - Default:usb-storage- Filesystem to disable, example xfs.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Disable USB Storage":
filesystem: "usb-storage"
Alternate Config IDs:
1.1.24c1_1_24disable_usb_storage
Resource:
Sce_linux::Utils::Disable_fs_mounting['Disable usb storage']
1.2.3 - Ensure gpgcheck is globally activated
Parameters:
yum_conf- [Stdlib::UnixPath] - Default:/etc/yum.conf- Full path to yum.conf file.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure gpgcheck is globally activated":
yum_conf: "/etc/yum.conf"
Alternate Config IDs:
1.2.3c1_2_3ensure_gpgcheck_is_globally_activated
Resource:
Class['sce_linux::utils::yum::enable_gpgcheck']
1.3.1 - Ensure AIDE is installed
Parameters:
control_package- [Optional[Boolean]] - Default:true- Whether or not to ensure the package is installed.package_ensure- [Optional[String]] - Default:present- Passed directly to the package resource for aide.manage_config- [Optional[Boolean]] - Default:true- Whether or not to manage /etc/aide.conf.run_scheduled- [Optional[Boolean]] - Default:true- Whether or not to set AIDE to run on a schedule.scheduler- [Optional[Enum[\systemd\, \cron\]]] - Default:systemd- Whether to use a systemd timer or cron job to schedule AIDE scans.systemd_timer_schedule- [Optional[String]] - Default:*-*-* 00:00:00- Used as the systemd timer unit file's OnSchedule directive.conf_purge- [Optional[Boolean]] - Default:undef- Setting purge to true means that no default values will be used. WARNING: You MUST configure ALL CONFIG OPTIONS when using purge to ensure that AIDE can function.conf_db_dir- [Optional[String]] - Default:/var/lib/aide- The directory AIDE will use to store the DB.conf_log_dir- [Optional[String]] - Default:/var/log/aide- The directory AIDE will use to store the log file.conf_verbosity- [Optional[Integer]] - Default:5- How verbose AIDE is in logging. Default: 5conf_report_urls- [Optional[Array[String]]] - Default:["file:@@{LOGDIR}/aide.log", "stdout"]- Where AIDE should send check results.conf_rules- [Optional[Array[String]]] - Default:["PERMS = p+u+g+acl+xattrs", "CONTENT_EX = sha256+ftype+p+u+g+n+acl+xattrs"]- Custom rule definitions for the AIDE config file. Each item is passed into the config as is, so rule definitions should look like: "PERMS = p+u+g+acl+selinux+xattrs". See docs for defaults.conf_checks- [Optional[Array[String]]] - Default:["/boot/ CONTENT_EX", "/bin/ CONTENT_EX", "/sbin/ CONTENT_EX", "/lib/ CONTENT_EX", "/lib64/ CONTENT_EX", "/opt/ CONTENT_EX", "/root/\\..* PERMS", "/root/ CONTENT_EX", "!/usr/src/", "!/usr/tmp/", "/usr/ CONTENT_EX", "!/etc/mtab$", "!/etc/.*null", "/etc/hosts$ CONTENT_EX", "/etc/passwd$ CONTENT_EX", "/etc/group$ CONTENT_EX", "/etc/gshadow$ CONTENT_EX", "/etc/shadow$ CONTENT_EX", "/etc/resolv.conf$ CONTENT_EX", "/etc/login.defs$ CONTENT_EX", "/etc/libuser.conf$ CONTENT_EX", "/var/log/faillog$ PERMS", "/var/log/lastlog$ PERMS", "/var/run/faillock/ PERMS", "/etc/pam.d/ CONTENT_EX", "/etc/security$ CONTENT_EX", "/etc/securetty$ CONTENT_EX", "/etc/polkit-1/ CONTENT_EX", "/etc/sudo.conf$ CONTENT_EX", "/etc/sudoers$ CONTENT_EX", "/etc/sudoers.d/ CONTENT_EX", "!/var/log/sa/", "!/var/log/aide.log", "/etc/ PERMS", "!/var/log/httpd/", "!/opt/puppetlabs/puppet/cache/", "!/opt/puppetlabs/puppet/public/last_run_summary.yaml"]- Directory and file checks. As AIDE parses these from top to bottom in the config file, the way you order this array matters. Individual file checks should come before their parent directory checks. Each check is passed into the config as is, so checks should look like: "/boot/ CONTENT_EX". See docs for defaults. If you choose not to use the default values, it is HIGHLY RECOMMENDED that you ignore the directory /opt/puppetlabs/puppet/cache/ and ignore the file /opt/puppetlabs/puppet/public/last_run_summary.yaml as these change every Puppet run.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure AIDE is installed":
control_package: true
package_ensure: "present"
manage_config: true
run_scheduled: true
scheduler: "systemd"
systemd_timer_schedule: "*-*-* 00:00:00"
conf_purge: <<Type Boolean>>
conf_db_dir: "/var/lib/aide"
conf_log_dir: "/var/log/aide"
conf_verbosity: 5
conf_report_urls: ["file:@@{LOGDIR}/aide.log", "stdout"]
conf_rules: ["PERMS = p+u+g+acl+xattrs", "CONTENT_EX = sha256+ftype+p+u+g+n+acl+xattrs"]
conf_checks: ["/boot/ CONTENT_EX", "/bin/ CONTENT_EX", "/sbin/ CONTENT_EX", "/lib/ CONTENT_EX", "/lib64/ CONTENT_EX", "/opt/ CONTENT_EX", "/root/\\..* PERMS", "/root/ CONTENT_EX", "!/usr/src/", "!/usr/tmp/", "/usr/ CONTENT_EX", "!/etc/mtab$", "!/etc/.*null", "/etc/hosts$ CONTENT_EX", "/etc/passwd$ CONTENT_EX", "/etc/group$ CONTENT_EX", "/etc/gshadow$ CONTENT_EX", "/etc/shadow$ CONTENT_EX", "/etc/resolv.conf$ CONTENT_EX", "/etc/login.defs$ CONTENT_EX", "/etc/libuser.conf$ CONTENT_EX", "/var/log/faillog$ PERMS", "/var/log/lastlog$ PERMS", "/var/run/faillock/ PERMS", "/etc/pam.d/ CONTENT_EX", "/etc/security$ CONTENT_EX", "/etc/securetty$ CONTENT_EX", "/etc/polkit-1/ CONTENT_EX", "/etc/sudo.conf$ CONTENT_EX", "/etc/sudoers$ CONTENT_EX", "/etc/sudoers.d/ CONTENT_EX", "!/var/log/sa/", "!/var/log/aide.log", "/etc/ PERMS", "!/var/log/httpd/", "!/opt/puppetlabs/puppet/cache/", "!/opt/puppetlabs/puppet/public/last_run_summary.yaml"]
Alternate Config IDs:
1.3.1c1_3_1ensure_aide_is_installed
Resource:
Class['sce_linux::utils::packages::linux::aide']
1.4.1 - Ensure bootloader password is set
Parameters:
password_protect- [Boolean] - Default:true- Whether or not to password protect the bootloader.superuser- [Optional[String[1]]] - Default:undef- The username of the grub2 superuser. This is used to set a superuser password in the bootloader configuration. This is only used if password_protect is true.superuser_password- [Optional[Sensitive[String]]] - Default:undef- The password of the grub2 superuser. This will be the superuser password in the bootloader configuration. This is only used if password_protect is true.password_file- [Stdlib::UnixPath] - Default:/etc/grub.d/50_password- The path to the file containing the bootloader password(s). This is only used if password_protect is true.replace_password_file- [Boolean] - If true, replaces the password file if it exists with a NEW hash of the password. Also, when set to true, this resource is NOT idempotent. When set to false, this prevent accidental overwriting of the password file with a new hash of the same password.hash_superuser_password- [Boolean] - Default:true- If true, the superuser password will be hashed using PBKDF2-HMAC-SHA512. If false, the superuser password will be stored in the password file as-is. This is only used if password_protect is true.superuser_password_salt_length- [Optional[Integer]] - Default:undef- The length of the salt in bits used to hash the superuser password. Default is 128. This is optional and only used if password_protect and hash_superuser_password are true.superuser_password_buffer_length- [Optional[Integer]] - Default:undef- The length of the resulting hash. Default is 128. This is optional and only used if password_protect and hash_superuser_password are true.superuser_password_iterations- [Optional[Integer]] - Default:undef- The number of times the password is passed through the hash function. Default is 120000. This is optional and only used if password_protect and hash_superuser_password are true.other_users- [Optional[Array[Struct[{username=>String[1], password=>Sensitive[String], salt_length=>Optional[String], buffer_length=>Optional[Integer], iterations=>Optional[Integer]}]]]] - Default:undef- An array of structured hashes to add other users besides the superuser to the password file. This is optional only used if password_protect is true. The users specified here will be added to the password file as regular users, not superusers. Other user passwords will be hashed using PBKDF2-HMAC-SHA512, just like the superuser password, if hash_other_user_passwords is true.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure bootloader password is set":
password_protect: true
superuser: <<Type String[1]>>
superuser_password: <<Type Sensitive[String]>>
password_file: "/etc/grub.d/50_password"
replace_password_file: false
hash_superuser_password: true
superuser_password_salt_length: <<Type Integer>>
superuser_password_buffer_length: <<Type Integer>>
superuser_password_iterations: <<Type Integer>>
other_users: <<Type Array[Struct[{username=>String[1], password=>Sensitive[String], salt_length=>Optional[String], buffer_length=>Optional[Integer], iterations=>Optional[Integer]}]]>>
Alternate Config IDs:
1.4.1c1_4_1ensure_bootloader_password_is_set
Resource:
Class['sce_linux::utils::bootloader::grub2']
1.4.2 - Ensure permissions on bootloader config are configured
Parameters:
ensure_permissions- [Boolean] - Default:true- Whether or not to enforce correct permissions on the bootloader files.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on bootloader config are configured":
ensure_permissions: true
Alternate Config IDs:
1.4.2c1_4_2ensure_permissions_on_bootloader_config_are_configured
Resource:
Class['sce_linux::utils::bootloader::grub2']
1.4.3 - Ensure authentication required for single user mode
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.4.3c1_4_3ensure_authentication_required_for_single_user_mode
Resource:
Class['sce_linux::utils::single_user_mode_authentication']
1.5.1 - Ensure core dumps are restricted
Parameters:
limits_file- [Optional[String]] - Default:10-disable_core_dumps.confsysctl_file- [Optional[String]] - Default:10-disable_core_dumps.confservice_content- [Optional[String]] - Default:# THIS FILE IS MANAGED BY PUPPET [Coredump] Storage=none ProcessSizeMax=0
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure core dumps are restricted":
limits_file: "10-disable_core_dumps.conf"
sysctl_file: "10-disable_core_dumps.conf"
service_content: "# THIS FILE IS MANAGED BY PUPPET\n[Coredump]\nStorage=none\nProcessSizeMax=0\n"
Alternate Config IDs:
1.5.1c1_5_1ensure_core_dumps_are_restricted
Resource:
Class['sce_linux::utils::disable_core_dumps']
1.5.3 - Ensure address space layout randomization (ASLR) is enabled
Parameters:
sysctl_file- [String] - Default:10-enable_aslr.conf- The sysctl file that values will be written to.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure address space layout randomization (ASLR) is enabled":
sysctl_file: "10-enable_aslr.conf"
Alternate Config IDs:
1.5.3c1_5_3ensure_address_space_layout_randomization_aslr_is_enabled
Resource:
Class['sce_linux::utils::enable_aslr']
1.5.4 - Ensure prelink is not installed
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.5.4c1_5_4ensure_prelink_is_not_installed
Resource:
Class['sce_linux::utils::disable_prelink']
1.6.1.1 - Ensure SELinux is installed
Parameters:
manage_package- [Optional[Boolean]] - Default:true- Enable or disable selinux package management.package_name- [Optional[String[1]]] - Default:libselinux- Name of package.mode- [Optional[Enum[\permissive\, \enforcing\]]] - Default:enforcing- Selinux mode, permissive or enforcing. Disabled is not supported.type- [Optional[Enum[\targeted\, \mls\]]] - Default:targeted- SELinux enforcement type.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure SELinux is installed":
manage_package: true
package_name: "libselinux"
mode: "enforcing"
type: "targeted"
Alternate Config IDs:
1.6.1.1c1_6_1_1ensure_selinux_is_installed
Resource:
Class['sce_linux::utils::packages::linux::selinux']
1.6.1.2 - Ensure SELinux is not disabled in bootloader configuration
Parameters:
enable_selinux- [Boolean] - Default:true- Whether or not to enable SELinux in the bootloader boot command.selinux_mode- [Enum["permissive", "enforcing", "disabled"]] - Default:enforcing- The SELinux enforcement mode to set in the bootloader. Only used if enable_selinux is true.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure SELinux is not disabled in bootloader configuration":
enable_selinux: true
selinux_mode: "enforcing"
Alternate Config IDs:
1.6.1.2c1_6_1_2ensure_selinux_is_not_disabled_in_bootloader_configuration
Resource:
Class['sce_linux::utils::bootloader::grub2']
1.6.1.3 - Ensure SELinux policy is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.6.1.3c1_6_1_3ensure_selinux_policy_is_configured
Resource:
Class['sce_linux::utils::packages::linux::selinux']
1.6.1.4 - Ensure the SELinux mode is enforcing or permissive
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.6.1.4c1_6_1_4ensure_the_selinux_mode_is_enforcing_or_permissive
Resource:
Class['sce_linux::utils::packages::linux::selinux']
1.6.1.5 - Ensure the SELinux mode is enforcing
Parameters:
No parameters
Supported Profiles & Levels:
server, level_2workstation, level_2
Alternate Config IDs:
1.6.1.5c1_6_1_5ensure_the_selinux_mode_is_enforcing
Resource:
Class['sce_linux::utils::packages::linux::selinux']
1.6.1.7 - Ensure SETroubleshoot is not installed
Parameters:
pkg_name- [String[1]] - Default:setroubleshoot- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure SETroubleshoot is not installed":
pkg_name: "setroubleshoot"
Alternate Config IDs:
1.6.1.7c1_6_1_7ensure_setroubleshoot_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not install setroubleshoot']
1.6.1.8 - Ensure the MCS Translation Service (mcstrans) is not installed
Parameters:
pkg_name- [String[1]] - Default:mcstrans- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure the MCS Translation Service (mcstrans) is not installed":
pkg_name: "mcstrans"
Alternate Config IDs:
1.6.1.8c1_6_1_8ensure_the_mcs_translation_service_mcstrans_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not install mcs translation service']
1.7.1 - Ensure message of the day is configured properly
Parameters:
dynamic_motd- [Optional[Boolean]] - Default:true- Enables or disables dynamic motd on Debian systems. Defaulttruemotd_template- [Optional[String[1]]] - Default:undef- Specifies a custom motd template or text file. A template takes precedence overcontent. Valid options: '/mymodule/mytemplate.epp'.motd_content- [Optional[String]] - Default: `` - Specifies a static string as the motd content. Default "This is a secure system. Unauthorized access is strictly prohibited.\r\n"issue_content- [Optional[String]] - Default:This is a secure system. Unauthorized access is strictly prohibited.- Specifies a static string as the/etc/issuecontent. Default "This is a secure system. Unauthorized access is strictly prohibited.\r\n"issue_net_content- [Optional[String]] - Default:This is a secure system. Unauthorized access is strictly prohibited.issue_template- [Optional[String[1]]] - Default:undef- Specifies a custom template or text file to process and save to/etc/issue. A template takes precedence overissue_content.issue_net_template- [Optional[String[1]]] - Default:undef- Specifies a custom template or text file to process and save to/etc/issue.net. A template takes precedence overissue_net_content.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure message of the day is configured properly":
dynamic_motd: true
motd_template: <<Type String[1]>>
motd_content: ""
issue_content: "This is a secure system. Unauthorized access is strictly prohibited.\r\n"
issue_net_content: "This is a secure system. Unauthorized access is strictly prohibited.\r\n"
issue_template: <<Type String[1]>>
issue_net_template: <<Type String[1]>>
Alternate Config IDs:
1.7.1c1_7_1ensure_message_of_the_day_is_configured_properly
Resource:
Class['sce_linux::utils::motd']
1.7.2 - Ensure local login warning banner is configured properly
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.7.2c1_7_2ensure_local_login_warning_banner_is_configured_properly
Resource:
Class['sce_linux::utils::motd']
1.7.3 - Ensure remote login warning banner is configured properly
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.7.3c1_7_3ensure_remote_login_warning_banner_is_configured_properly
Resource:
Class['sce_linux::utils::motd']
1.7.4 - Ensure permissions on /etc/motd are configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.7.4c1_7_4ensure_permissions_on_etcmotd_are_configured
Resource:
Class['sce_linux::utils::motd']
1.7.5 - Ensure permissions on /etc/issue are configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.7.5c1_7_5ensure_permissions_on_etcissue_are_configured
Resource:
Class['sce_linux::utils::motd']
1.7.6 - Ensure permissions on /etc/issue.net are configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
1.7.6c1_7_6ensure_permissions_on_etcissue_net_are_configured
Resource:
Class['sce_linux::utils::motd']
2.1.1 - Ensure xinetd is not installed
Parameters:
pkg_name- [String[1]] - Default:xinetd- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure xinetd is not installed":
pkg_name: "xinetd"
Alternate Config IDs:
2.1.1c2_1_1ensure_xinetd_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not install xinetd']
2.2.1.1 - Ensure time synchronization is in use
Parameters:
preferred_package- [Enum["chrony", "ntp", "systemd-timesyncd"]] - Default:chrony- The preferred package to use for time synchronization.manage_package- [Boolean] - Default:true- If true, the package will be installed and managed by Puppet.force_exclusivity- [Boolean] - Default:true- If true, the package that was not chosen will be removed from the system. This means that if your preferred package is chrony, ntp will be removed. This only applies to RedHat-family operating systems.timeservers- [Array[String]] - Default:Puppet::AST::LiteralList({'locator' => Puppet::AST::Locator({}), 'offset' => 3328, 'length' => 2})- Array of strings starting with the type (pool, server, etc.), then hostname / ip, then any options. Each element of the timeservers array will be added to the chrony / ntp / systemd-timesyncd config file as is. Please seeman chrony.conf(5),man ntp.conf(5), orman timesyncd.conf(5)for more details. Example (ntp / chrony): ['server 192.168.0.250 prefer iburst', 'server 192.168.0.251 iburst'] Example (systemd-timesyncd): ['pool 0.ubuntu.pool.ntp.org', 'pool 1.ubuntu.pool.ntp.org']sysconfig_options- [Optional[String[1]]] - Default:undef- Options to be added to the sysconfig file for the chosen package. This defaults to-u chronyfor the chrony package and-u ntp:ntpfor the ntp package. This has no affect on the systemd-timesyncd package.ntp_restricts- [Optional[Array[String[1]]]] - Default:["-4 default kod nomodify notrap nopeer noquery", "-6 default kod nomodify notrap nopeer noquery"]- Array of strings used to createrestrictlines in the ntp config file. Defaults to `['-4 default kod nomodify notrap nopeer noquery', '-6 default kod nomodify notrap nopeer noquery']
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure time synchronization is in use":
preferred_package: "chrony"
manage_package: true
force_exclusivity: true
timeservers: Puppet::AST::LiteralList({'locator' => Puppet::AST::Locator({}), 'offset' => 3328, 'length' => 2})
sysconfig_options: <<Type String[1]>>
ntp_restricts: ["-4 default kod nomodify notrap nopeer noquery", "-6 default kod nomodify notrap nopeer noquery"]
Alternate Config IDs:
2.2.1.1c2_2_1_1ensure_time_synchronization_is_in_use
Resource:
Class['sce_linux::utils::timesync']
2.2.1.2 - Ensure chrony is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
2.2.1.2c2_2_1_2ensure_chrony_is_configured
Resource:
Class['sce_linux::utils::timesync']
2.2.1.3 - Ensure ntp is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
2.2.1.3c2_2_1_3ensure_ntp_is_configured
Resource:
Class['sce_linux::utils::timesync']
2.2.2 - Ensure X11 Server components are not installed
Parameters:
pkg_name- [String[1]] - Default:xorg-x11-server*- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure X11 Server components are not installed":
pkg_name: "xorg-x11-server*"
Alternate Config IDs:
2.2.2c2_2_2ensure_x11_server_components_are_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not install x11 server components']
2.2.3 - Ensure Avahi Server is not installed
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_2
Alternate Config IDs:
2.2.3c2_2_3ensure_avahi_server_is_not_installed
Resource:
Class['sce_linux::utils::remove_avahi_server']
2.2.4 - Ensure CUPS is not installed
Parameters:
pkg_name- [String[1]] - Default:cups- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure CUPS is not installed":
pkg_name: "cups"
Alternate Config IDs:
2.2.4c2_2_4ensure_cups_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not install CUPS']
2.2.5 - Ensure DHCP Server is not installed
Parameters:
pkg_name- [String[1]] - Default:dhcp- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure DHCP Server is not installed":
pkg_name: "dhcp"
Alternate Config IDs:
2.2.5c2_2_5ensure_dhcp_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use DHCP server']
2.2.6 - Ensure LDAP server is not installed
Parameters:
pkg_name- [String[1]] - Default:openldap-servers- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure LDAP server is not installed":
pkg_name: "openldap-servers"
Alternate Config IDs:
2.2.6c2_2_6ensure_ldap_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not LDAP server']
2.2.7 - Ensure DNS Server is not installed
Parameters:
pkg_name- [String[1]] - Default:bind- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure DNS Server is not installed":
pkg_name: "bind"
Alternate Config IDs:
2.2.7c2_2_7ensure_dns_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use DNS server']
2.2.8 - Ensure FTP Server is not installed
Parameters:
pkg_name- [String[1]] - Default:vsftpd- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure FTP Server is not installed":
pkg_name: "vsftpd"
Alternate Config IDs:
2.2.8c2_2_8ensure_ftp_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use ftp server']
2.2.9 - Ensure HTTP server is not installed
Parameters:
pkg_name- [String[1]] - Default:httpd- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure HTTP server is not installed":
pkg_name: "httpd"
Alternate Config IDs:
2.2.9c2_2_9ensure_http_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use HTTP Server']
2.2.10 - Ensure IMAP and POP3 server is not installed
Parameters:
mail_servers- [Array[String]] - Default:["dovecot", "postfix"]- Array of mail servers that will be removed from the managed machine
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure IMAP and POP3 server is not installed":
mail_servers: ["dovecot", "postfix"]
Alternate Config IDs:
2.2.10c2_2_10ensure_imap_and_pop3_server_is_not_installed
Resource:
Class['sce_linux::utils::remove_imap_and_pop3']
2.2.11 - Ensure Samba is not installed
Parameters:
pkg_name- [String[1]] - Default:samba- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure Samba is not installed":
pkg_name: "samba"
Alternate Config IDs:
2.2.11c2_2_11ensure_samba_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use Samba']
2.2.12 - Ensure HTTP Proxy Server is not installed
Parameters:
proxy_packages- [Array[String]] - Default:["squid"]- Array of proxy packages that will be removed from the managed machine
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure HTTP Proxy Server is not installed":
proxy_packages: ["squid"]
Alternate Config IDs:
2.2.12c2_2_12ensure_http_proxy_server_is_not_installed
Resource:
Class['sce_linux::utils::remove_http_proxy']
2.2.13 - Ensure net-snmp is not installed
Parameters:
pkg_name- [String[1]] - Default:net-snmp- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure net-snmp is not installed":
pkg_name: "net-snmp"
Alternate Config IDs:
2.2.13c2_2_13ensure_net_snmp_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use net-snmp']
2.2.14 - Ensure NIS server is not installed
Parameters:
pkg_name- [String[1]] - Default:ypserv- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure NIS server is not installed":
pkg_name: "ypserv"
Alternate Config IDs:
2.2.14c2_2_14ensure_nis_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Disable NIS Server']
2.2.15 - Ensure telnet-server is not installed
Parameters:
pkg_name- [String[1]] - Default:telnet-server- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure telnet-server is not installed":
pkg_name: "telnet-server"
Alternate Config IDs:
2.2.15c2_2_15ensure_telnet_server_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Remove Telnet server']
2.2.16 - Ensure mail transfer agent is configured for local-only mode
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
2.2.16c2_2_16ensure_mail_transfer_agent_is_configured_for_local_only_mode
Resource:
Class['sce_linux::utils::local_only_mta']
2.2.17 - Ensure nfs-utils is not installed or the nfs-server service is masked
Parameters:
keep_nfsutils- [Boolean] - A boolean value that represent the choice of whether to mask the nfs-server or remove it.dependent- [Array] - Default:["ensure_rpcbind_is_not_installed_or_the__rpcbind_services_are_masked"]
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure nfs-utils is not installed or the nfs-server service is masked":
keep_nfsutils: false
dependent: ["ensure_rpcbind_is_not_installed_or_the__rpcbind_services_are_masked"]
Alternate Config IDs:
2.2.17c2_2_17ensure_nfs_utils_is_not_installed_or_the__nfs_server_service_is_masked
Resource:
Class['sce_linux::utils::disable_or_remove_nfs']
2.2.18 - Ensure rpcbind is not installed or the rpcbind services are masked
Parameters:
keep_rpcbind- [Boolean] - A boolean value that represent the choice of whether to mask rpcbind or remove it.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure rpcbind is not installed or the rpcbind services are masked":
keep_rpcbind: false
Alternate Config IDs:
2.2.18c2_2_18ensure_rpcbind_is_not_installed_or_the__rpcbind_services_are_masked
Resource:
Class['sce_linux::utils::disable_or_remove_rpcbind']
2.2.19 - Ensure rsync is not installed or the rsyncd service is masked
Parameters:
keep_rsync- [Boolean] - A boolean value that represent the choice of whether to mask rsync or remove it.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure rsync is not installed or the rsyncd service is masked":
keep_rsync: false
Alternate Config IDs:
2.2.19c2_2_19ensure_rsync_is_not_installed_or_the_rsyncd_service_is_masked
Resource:
Class['sce_linux::utils::disable_or_remove_rsync']
2.3.1 - Ensure NIS Client is not installed
Parameters:
pkg_name- [String[1]] - Default:ypbind- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure NIS Client is not installed":
pkg_name: "ypbind"
Alternate Config IDs:
2.3.1c2_3_1ensure_nis_client_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use NIS Client']
2.3.2 - Ensure rsh client is not installed
Parameters:
pkg_name- [String[1]] - Default:rsh- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure rsh client is not installed":
pkg_name: "rsh"
Alternate Config IDs:
2.3.2c2_3_2ensure_rsh_client_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use rsh']
2.3.3 - Ensure talk client is not installed
Parameters:
pkg_name- [String[1]] - Default:talk- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure talk client is not installed":
pkg_name: "talk"
Alternate Config IDs:
2.3.3c2_3_3ensure_talk_client_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Do not use talk client']
2.3.4 - Ensure telnet client is not installed
Parameters:
pkg_name- [String[1]] - Default:telnet- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure telnet client is not installed":
pkg_name: "telnet"
Alternate Config IDs:
2.3.4c2_3_4ensure_telnet_client_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Remove Telnet Client']
2.3.5 - Ensure LDAP client is not installed
Parameters:
pkg_name- [String[1]] - Default:openldap-clients- Name of package to remove.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure LDAP client is not installed":
pkg_name: "openldap-clients"
Alternate Config IDs:
2.3.5c2_3_5ensure_ldap_client_is_not_installed
Resource:
Sce_linux::Utils::Packages::Absenter['Remove LDAP Client']
3.1.1 - Disable IPv6
Parameters:
strategy- [Enum["sysctl", "grub"]] - Default:sysctl- Whether to disable IPv6 with sysctl or in the grub configcreate_sysctl_file- [Boolean] - Default:true- Whether to create a new sysctl file or to use the default config filesysctl_conf- [String] - Default:/etc/sysctl.conf- Path to sysctl.conf.sysctl_d_path- [String] - Default:/etc/sysctl.d- Path to sysctl.d.sysctl_prefix- [String] - Default:10-- A prefix to add to the created file name.sysctl_comment- [String] - Default:MANAGED BY PUPPET- A comment to add to the created file.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Disable IPv6":
strategy: "sysctl"
create_sysctl_file: true
sysctl_conf: "/etc/sysctl.conf"
sysctl_d_path: "/etc/sysctl.d"
sysctl_prefix: "10-"
sysctl_comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.1.1c3_1_1disable_ipv6
Resource:
Class['sce_linux::utils::network::disable_ipv6']
3.1.2 - Ensure wireless interfaces are disabled
Parameters:
wwan- [Boolean] - Default:true- Whether to disable wwanwifi- [Boolean] - Default:true- Whether to disable wifi
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure wireless interfaces are disabled":
wwan: true
wifi: true
Alternate Config IDs:
3.1.2c3_1_2ensure_wireless_interfaces_are_disabled
Resource:
Sce_linux::Utils::Network::Disable_wireless_interfaces['Disable wireless interfaces']
3.2.1 - Ensure IP forwarding is disabled
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-disable_ip_forwarding.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure IP forwarding is disabled":
target: "/etc/sysctl.d/90-disable_ip_forwarding.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.2.1c3_2_1ensure_ip_forwarding_is_disabled
Resource:
Class['sce_linux::utils::network::disable_ip_forwarding']
3.2.2 - Ensure packet redirect sending is disabled
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-disable_packet_redirect_sending.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure packet redirect sending is disabled":
target: "/etc/sysctl.d/90-disable_packet_redirect_sending.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.2.2c3_2_2ensure_packet_redirect_sending_is_disabled
Resource:
Class['sce_linux::utils::network::disable_packet_redirect_sending']
3.3.1 - Ensure source routed packets are not accepted
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-disable_source_routes.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure source routed packets are not accepted":
target: "/etc/sysctl.d/90-disable_source_routes.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.1c3_3_1ensure_source_routed_packets_are_not_accepted
Resource:
Class['sce_linux::utils::network::disable_source_routes']
3.3.2 - Ensure ICMP redirects are not accepted
Parameters:
disable_ipv4_accept_default- [Boolean] - Default:true- Disable accepting IPv4 ICMP redirects on default routedisable_ipv4_accept_all- [Boolean] - Default:true- Disable accepting IPv4 ICMP redirects on all routesdisable_ipv6_accept_default- [Boolean] - Default:true- Disable accepting IPv6 ICMP redirects on default routedisable_ipv6_accept_all- [Boolean] - Default:true- Disable accepting IPv6 ICMP redirects on all routestarget- [Stdlib::UnixPath] - Default:/etc/sysctl.d/90-disable_icmp_redirects.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure ICMP redirects are not accepted":
disable_ipv4_accept_default: true
disable_ipv4_accept_all: true
disable_ipv6_accept_default: true
disable_ipv6_accept_all: true
target: "/etc/sysctl.d/90-disable_icmp_redirects.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.2c3_3_2ensure_icmp_redirects_are_not_accepted
Resource:
Class['sce_linux::utils::network::disable_icmp_redirects']
3.3.3 - Ensure secure ICMP redirects are not accepted
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-disable_secure_icmp_redirects.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure secure ICMP redirects are not accepted":
target: "/etc/sysctl.d/90-disable_secure_icmp_redirects.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.3c3_3_3ensure_secure_icmp_redirects_are_not_accepted
Resource:
Class['sce_linux::utils::network::disable_secure_icmp_redirects']
3.3.4 - Ensure suspicious packets are logged
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-enable_log_martians.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure suspicious packets are logged":
target: "/etc/sysctl.d/90-enable_log_martians.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.4c3_3_4ensure_suspicious_packets_are_logged
Resource:
Class['sce_linux::utils::network::enable_log_martians']
3.3.5 - Ensure broadcast ICMP requests are ignored
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-ignore_icmp_broadcast.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure broadcast ICMP requests are ignored":
target: "/etc/sysctl.d/90-ignore_icmp_broadcast.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.5c3_3_5ensure_broadcast_icmp_requests_are_ignored
Resource:
Class['sce_linux::utils::network::ignore_icmp_broadcast']
3.3.6 - Ensure bogus ICMP responses are ignored
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-ignore_bogus_icmp.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure bogus ICMP responses are ignored":
target: "/etc/sysctl.d/90-ignore_bogus_icmp.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.6c3_3_6ensure_bogus_icmp_responses_are_ignored
Resource:
Class['sce_linux::utils::network::ignore_bogus_icmp']
3.3.7 - Ensure Reverse Path Filtering is enabled
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-enable_reverse_path_filtering.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure Reverse Path Filtering is enabled":
target: "/etc/sysctl.d/90-enable_reverse_path_filtering.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.7c3_3_7ensure_reverse_path_filtering_is_enabled
Resource:
Class['sce_linux::utils::network::enable_reverse_path_filtering']
3.3.8 - Ensure TCP SYN Cookies is enabled
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-enable_tcp_syn_cookies.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure TCP SYN Cookies is enabled":
target: "/etc/sysctl.d/90-enable_tcp_syn_cookies.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.8c3_3_8ensure_tcp_syn_cookies_is_enabled
Resource:
Class['sce_linux::utils::network::enable_tcp_syn_cookies']
3.3.9 - Ensure IPv6 router advertisements are not accepted
Parameters:
target- [String[1]] - Default:/etc/sysctl.d/90-disable_ipv6_router_advertisements.conf- The sysctl file that values will be written to.persist- [Boolean] - Default:true- If set to false, no values will be persisted to disk. Setting this to false will cause $target and $comment to be ignored.comment- [String] - Default:MANAGED BY PUPPET- A comment to add to add to each setting. Default:MANAGED BY PUPPET
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure IPv6 router advertisements are not accepted":
target: "/etc/sysctl.d/90-disable_ipv6_router_advertisements.conf"
persist: true
comment: "MANAGED BY PUPPET"
Alternate Config IDs:
3.3.9c3_3_9ensure_ipv6_router_advertisements_are_not_accepted
Resource:
Class['sce_linux::utils::network::disable_ipv6_router_advertisements']
3.4.1 - Ensure DCCP is disabled
Parameters:
target- [Optional[String[1]]] - Default:/etc/modprobe.d/dccp.conf- Target file to write.content- [Optional[String]] - Default:install dccp /bin/true- Target file content.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure DCCP is disabled":
target: "/etc/modprobe.d/dccp.conf"
content: "install dccp /bin/true"
Alternate Config IDs:
3.4.1c3_4_1ensure_dccp_is_disabled
Resource:
Class['sce_linux::utils::network::disable_dccp']
3.4.2 - Ensure SCTP is disabled
Parameters:
target- [Optional[String[1]]] - Default:/etc/modprobe.d/sctp.conf- Target file to write.content- [Optional[String]] - Default:install sctp /bin/true- Target file content.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure SCTP is disabled":
target: "/etc/modprobe.d/sctp.conf"
content: "install sctp /bin/true"
Alternate Config IDs:
3.4.2c3_4_2ensure_sctp_is_disabled
Resource:
Class['sce_linux::utils::network::disable_sctp']
3.5.1.1 - Ensure firewalld is installed
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.1.1c3_5_1_1ensure_firewalld_is_installed
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.1.2 - Ensure iptables-services not installed with firewalld
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.1.2c3_5_1_2ensure_iptables_services_not_installed_with_firewalld
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.1.3 - Ensure nftables either not installed or masked with firewalld
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.1.3c3_5_1_3ensure_nftables_either_not_installed_or_masked_with_firewalld
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.1.4 - Ensure firewalld service enabled and running
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.1.4c3_5_1_4ensure_firewalld_service_enabled_and_running
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.1.5 - Ensure firewalld default zone is set
Parameters:
default_zone- [Optional[String[1]]] - Default:public- Sets the default firewalld zone to this zone. Default:public
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure firewalld default zone is set":
default_zone: "public"
Alternate Config IDs:
3.5.1.5c3_5_1_5ensure_firewalld_default_zone_is_set
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.1.6 - Ensure network interfaces are assigned to appropriate zone
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.1.6c3_5_1_6ensure_network_interfaces_are_assigned_to_appropriate_zone
Resource:
Class['sce_linux::utils::firewall::firewalld']
3.5.3.1.1 - Ensure iptables packages are installed
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.1.1c3_5_3_1_1ensure_iptables_packages_are_installed
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.1.2 - Ensure nftables is not installed with iptables
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.1.2c3_5_3_1_2ensure_nftables_is_not_installed_with_iptables
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.1.3 - Ensure firewalld is either not installed or masked with iptables
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.1.3c3_5_3_1_3ensure_firewalld_is_either_not_installed_or_masked_with_iptables
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.1 - Ensure iptables loopback traffic is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.1c3_5_3_2_1ensure_iptables_loopback_traffic_is_configured
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.2 - Ensure iptables outbound and established connections are configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.2c3_5_3_2_2ensure_iptables_outbound_and_established_connections_are_configured
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.3 - Ensure iptables rules exist for all open ports
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.3c3_5_3_2_3ensure_iptables_rules_exist_for_all_open_ports
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.4 - Ensure iptables default deny firewall policy
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.4c3_5_3_2_4ensure_iptables_default_deny_firewall_policy
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.5 - Ensure iptables rules are saved
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.5c3_5_3_2_5ensure_iptables_rules_are_saved
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.2.6 - Ensure iptables is enabled and running
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.2.6c3_5_3_2_6ensure_iptables_is_enabled_and_running
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.1 - Ensure ip6tables loopback traffic is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.1c3_5_3_3_1ensure_ip6tables_loopback_traffic_is_configured
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.2 - Ensure ip6tables outbound and established connections are configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.2c3_5_3_3_2ensure_ip6tables_outbound_and_established_connections_are_configured
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.3 - Ensure ip6tables firewall rules exist for all open ports
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.3c3_5_3_3_3ensure_ip6tables_firewall_rules_exist_for_all_open_ports
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.4 - Ensure ip6tables default deny firewall policy
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.4c3_5_3_3_4ensure_ip6tables_default_deny_firewall_policy
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.5 - Ensure ip6tables rules are saved
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.5c3_5_3_3_5ensure_ip6tables_rules_are_saved
Resource:
Class['sce_linux::utils::firewall::iptables']
3.5.3.3.6 - Ensure ip6tables is enabled and running
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
3.5.3.3.6c3_5_3_3_6ensure_ip6tables_is_enabled_and_running
Resource:
Class['sce_linux::utils::firewall::iptables']
4.1.1.1 - Ensure auditd is installed
Parameters:
package- [Array] - Default:["audit", "audit-libs"]- Packages to install for auditd.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure auditd is installed":
package: ["audit", "audit-libs"]
Alternate Config IDs:
4.1.1.1c4_1_1_1ensure_auditd_is_installed
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.1.2 - Ensure auditd service is enabled and running
Parameters:
service- [String[1]] - Default:auditd- Name of auditd service.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure auditd service is enabled and running":
service: "auditd"
Alternate Config IDs:
4.1.1.2c4_1_1_2ensure_auditd_service_is_enabled_and_running
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.1.3 - Ensure auditing for processes that start prior to auditd is enabled
Parameters:
enable_auditd- [Boolean] - Default:true- Whether or not to enable auditd in the bootloader boot command.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure auditing for processes that start prior to auditd is enabled":
enable_auditd: true
Alternate Config IDs:
4.1.1.3c4_1_1_3ensure_auditing_for_processes_that_start_prior_to_auditd_is_enabled
Resource:
Class['sce_linux::utils::bootloader::grub2']
4.1.2.1 - Ensure audit log storage size is configured
Parameters:
max_log_file- [Integer[0]] - Default:8
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure audit log storage size is configured":
max_log_file: 8
Alternate Config IDs:
4.1.2.1c4_1_2_1ensure_audit_log_storage_size_is_configured
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.2.2 - Ensure audit logs are not automatically deleted
Parameters:
max_log_file_action- [Enum["keep_logs", "rotate", "ignore", "syslog", "suspend"]] - Default:keep_logs
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure audit logs are not automatically deleted":
max_log_file_action: "keep_logs"
Alternate Config IDs:
4.1.2.2c4_1_2_2ensure_audit_logs_are_not_automatically_deleted
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.2.3 - Ensure system is disabled when audit logs are full
Parameters:
space_left_action- [Enum["ignore", "syslog", "email", "suspend", "single", "halt"]] - Default:haltadmin_space_left_action- [Enum["ignore", "syslog", "email", "suspend", "single", "halt"]] - Default:haltaction_mail_acct- [String[1]] - Default:root
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure system is disabled when audit logs are full":
space_left_action: "halt"
admin_space_left_action: "halt"
action_mail_acct: "root"
Alternate Config IDs:
4.1.2.3c4_1_2_3ensure_system_is_disabled_when_audit_logs_are_full
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.2.4 - Ensure audit_backlog_limit is sufficient
Parameters:
audit_backlog_limit- [Integer] - Default:8192- The maximum number of audit log entries to keep in the backlog.
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure audit_backlog_limit is sufficient":
audit_backlog_limit: 8192
Alternate Config IDs:
4.1.2.4c4_1_2_4ensure_audit_backlog_limit_is_sufficient
Resource:
Class['sce_linux::utils::bootloader::grub2']
4.1.3 - Ensure events that modify date and time information are collected
Parameters:
audit_time_change- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure events that modify date and time information are collected":
audit_time_change: true
Alternate Config IDs:
4.1.3c4_1_3ensure_events_that_modify_date_and_time_information_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.4 - Ensure events that modify user/group information are collected
Parameters:
audit_usergroup_modification- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure events that modify user/group information are collected":
audit_usergroup_modification: true
Alternate Config IDs:
4.1.4c4_1_4ensure_events_that_modify_usergroup_information_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.5 - Ensure events that modify the system's network environment are collected
Parameters:
audit_network_environment- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure events that modify the system's network environment are collected":
audit_network_environment: true
Alternate Config IDs:
4.1.5c4_1_5ensure_events_that_modify_the_systems_network_environment_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.6 - Ensure events that modify the system's Mandatory Access Controls are collected
Parameters:
audit_mac_modification- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure events that modify the system's Mandatory Access Controls are collected":
audit_mac_modification: true
Alternate Config IDs:
4.1.6c4_1_6ensure_events_that_modify_the_systems_mandatory_access_controls_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.7 - Ensure login and logout events are collected
Parameters:
audit_lastlog_log- [Boolean] - Default:trueaudit_faillock_run- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure login and logout events are collected":
audit_lastlog_log: true
audit_faillock_run: true
Alternate Config IDs:
4.1.7c4_1_7ensure_login_and_logout_events_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.8 - Ensure session initiation information is collected
Parameters:
audit_session_initiation- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure session initiation information is collected":
audit_session_initiation: true
Alternate Config IDs:
4.1.8c4_1_8ensure_session_initiation_information_is_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.9 - Ensure discretionary access control permission modification events are collected
Parameters:
audit_dac_modification- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure discretionary access control permission modification events are collected":
audit_dac_modification: true
Alternate Config IDs:
4.1.9c4_1_9ensure_discretionary_access_control_permission_modification_events_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.10 - Ensure unsuccessful unauthorized file access attempts are collected
Parameters:
audit_unauthorized_file_access- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure unsuccessful unauthorized file access attempts are collected":
audit_unauthorized_file_access: true
Alternate Config IDs:
4.1.10c4_1_10ensure_unsuccessful_unauthorized_file_access_attempts_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.11 - Ensure use of privileged commands is collected
Parameters:
audit_privileged_commands- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure use of privileged commands is collected":
audit_privileged_commands: true
Alternate Config IDs:
4.1.11c4_1_11ensure_use_of_privileged_commands_is_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.12 - Ensure successful file system mounts are collected
Parameters:
audit_file_system_mounts- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure successful file system mounts are collected":
audit_file_system_mounts: true
Alternate Config IDs:
4.1.12c4_1_12ensure_successful_file_system_mounts_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.13 - Ensure file deletion events by users are collected
Parameters:
audit_file_deletion_events- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure file deletion events by users are collected":
audit_file_deletion_events: true
Alternate Config IDs:
4.1.13c4_1_13ensure_file_deletion_events_by_users_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.14 - Ensure changes to system administration scope (sudoers) is collected
Parameters:
audit_sudoers_modification- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure changes to system administration scope (sudoers) is collected":
audit_sudoers_modification: true
Alternate Config IDs:
4.1.14c4_1_14ensure_changes_to_system_administration_scope_sudoers_is_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.15 - Ensure system administrator command executions (sudo) are collected
Parameters:
audit_sudo_actions- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure system administrator command executions (sudo) are collected":
audit_sudo_actions: true
Alternate Config IDs:
4.1.15c4_1_15ensure_system_administrator_command_executions_sudo_are_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.16 - Ensure kernel module loading and unloading is collected
Parameters:
audit_kernel_module_loading- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure kernel module loading and unloading is collected":
audit_kernel_module_loading: true
Alternate Config IDs:
4.1.16c4_1_16ensure_kernel_module_loading_and_unloading_is_collected
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.1.17 - Ensure the audit configuration is immutable
Parameters:
set_immutable_configuration- [Boolean] - Default:true
Supported Profiles & Levels:
server, level_2workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure the audit configuration is immutable":
set_immutable_configuration: true
Alternate Config IDs:
4.1.17c4_1_17ensure_the_audit_configuration_is_immutable
Resource:
Class['sce_linux::utils::packages::linux::auditd']
4.2.1.1 - Ensure rsyslog is installed
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
4.2.1.1c4_2_1_1ensure_rsyslog_is_installed
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.1.2 - Ensure rsyslog Service is enabled and running
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
4.2.1.2c4_2_1_2ensure_rsyslog_service_is_enabled_and_running
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.1.3 - Ensure rsyslog default file permissions configured
Parameters:
filecreatemode- [Stdlib::FileMode] - Default:0640- Default file creation mode for rsyslog. Also used as the mode for the rsyslog configuration files.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure rsyslog default file permissions configured":
filecreatemode: "0640"
Alternate Config IDs:
4.2.1.3c4_2_1_3ensure_rsyslog_default_file_permissions_configured
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.1.4 - Ensure logging is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
4.2.1.4c4_2_1_4ensure_logging_is_configured
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.1.5 - Ensure rsyslog is configured to send logs to a remote log host
Parameters:
remote_log_host- [Optional[Variant[Stdlib::IP::Address, String[1], Array[Struct[{service=>String[1], host=>Variant[Stdlib::IP::Address, String[1]]}]]]]] - Default:undeftcp_port- [Integer] - Default:514- The port to use for the $InputTCPServerRun option.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure rsyslog is configured to send logs to a remote log host":
remote_log_host: <<Type Variant[Stdlib::IP::Address, String[1], Array[Struct[{service=>String[1], host=>Variant[Stdlib::IP::Address, String[1]]}]]]>>
tcp_port: 514
Alternate Config IDs:
4.2.1.5c4_2_1_5ensure_rsyslog_is_configured_to_send_logs_to_a_remote_log_host
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.1.6 - Ensure remote rsyslog messages are only accepted on designated log hosts.
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
4.2.1.6c4_2_1_6ensure_remote_rsyslog_messages_are_only_accepted_on_designated_log_hosts
Resource:
Class['sce_linux::utils::packages::linux::rsyslog']
4.2.2.1 - Ensure journald is configured to send logs to rsyslog
Parameters:
forward_to_syslog- [Optional[Variant[Boolean, Stdlib::Yes_no]]] - Default:true- If defined, configures optionForwardToSyslog=<yes|no>in the journald config. If a Boolean value is passed, true maps toyesand false maps tono.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure journald is configured to send logs to rsyslog":
forward_to_syslog: true
Alternate Config IDs:
4.2.2.1c4_2_2_1ensure_journald_is_configured_to_send_logs_to_rsyslog
Resource:
Class['sce_linux::utils::services::systemd::journald']
4.2.2.2 - Ensure journald is configured to compress large log files
Parameters:
compress_large_files- [Optional[Variant[Boolean, Stdlib::Yes_no]]] - Default:true- If defined, configures optionCompress=<yes|no>in the journald config. If a Boolean value is passed, true maps toyesand false maps tono.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure journald is configured to compress large log files":
compress_large_files: true
Alternate Config IDs:
4.2.2.2c4_2_2_2ensure_journald_is_configured_to_compress_large_log_files
Resource:
Class['sce_linux::utils::services::systemd::journald']
4.2.2.3 - Ensure journald is configured to write logfiles to persistent disk
Parameters:
persistent_storage- [Optional[Boolean]] - Default:true- Convenience method to set persistent as the storage option. If true, configures optionStorage=persistentin the journald config.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure journald is configured to write logfiles to persistent disk":
persistent_storage: true
Alternate Config IDs:
4.2.2.3c4_2_2_3ensure_journald_is_configured_to_write_logfiles_to_persistent_disk
Resource:
Class['sce_linux::utils::services::systemd::journald']
4.2.3 - Ensure permissions on all logfiles are configured
Parameters:
mode- [Stdlib::Filemode] - Default:0640- The mode to set the log files tomanage_dotfiles- [Boolean] - Default:true- Whether or not to manage dotfiles (files that start with a .)
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on all logfiles are configured":
mode: "0640"
manage_dotfiles: true
Alternate Config IDs:
4.2.3c4_2_3ensure_permissions_on_all_logfiles_are_configured
Resource:
Class['sce_linux::utils::chmod_logfiles']
4.2.4 - Ensure logrotate is configured
Parameters:
No parameters
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Alternate Config IDs:
4.2.4c4_2_4ensure_logrotate_is_configured
Resource:
Class['sce_linux::utils::packages::linux::logrotate']
5.1.1 - Ensure cron daemon is enabled and running
Parameters:
manage_package- [Boolean] - Default:true- If true, ensures the cron package is installed. See thepackage_nameparameter for more information.manage_service- [Boolean] - Default:true- If true, enables and runs the cron daemon with a service resource. See theservice_nameparameter for more information.cron_allow_path- [Stdlib::AbsolutePath] - Default:/etc/cron.allow- The path for the cron.allow file to manage. Only relevant ifset_cron_allow_permsis set totrue.purge_cron_deny- [Boolean] - Default:true- If true, removes (if they exist) /etc/cron.deny and /etc/cron.d/cron.deny.manage_cron_allow- [Boolean] - Default:true- If true, creates the cron.allow file specified by thecron_allow_pathparameter and enforces0600permissions on the file.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure cron daemon is enabled and running":
manage_package: true
manage_service: true
cron_allow_path: "/etc/cron.allow"
purge_cron_deny: true
manage_cron_allow: true
Alternate Config IDs:
5.1.1c5_1_1ensure_cron_daemon_is_enabled_and_running
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.2 - Ensure permissions on /etc/crontab are configured
Parameters:
set_crontab_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/crontab.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on /etc/crontab are configured":
set_crontab_perms: true
Alternate Config IDs:
5.1.2c5_1_2ensure_permissions_on_etccrontab_are_configured
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.3 - Ensure permissions on /etc/cron.hourly are configured
Parameters:
set_hourly_cron_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/cron.hourly.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on /etc/cron.hourly are configured":
set_hourly_cron_perms: true
Alternate Config IDs:
5.1.3c5_1_3ensure_permissions_on_etccron_hourly_are_configured
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.4 - Ensure permissions on /etc/cron.daily are configured
Parameters:
set_daily_cron_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/cron.daily.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on /etc/cron.daily are configured":
set_daily_cron_perms: true
Alternate Config IDs:
5.1.4c5_1_4ensure_permissions_on_etccron_daily_are_configured
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.5 - Ensure permissions on /etc/cron.weekly are configured
Parameters:
set_weekly_cron_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/cron.weekly.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on /etc/cron.weekly are configured":
set_weekly_cron_perms: true
Alternate Config IDs:
5.1.5c5_1_5ensure_permissions_on_etccron_weekly_are_configured
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.6 - Ensure permissions on /etc/cron.monthly are configured
Parameters:
set_monthly_cron_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/cron.monthly.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
sce_linux::config:
control_configs:
"Ensure permissions on /etc/cron.monthly are configured":
set_monthly_cron_perms: true
Alternate Config IDs:
5.1.6c5_1_6ensure_permissions_on_etccron_monthly_are_configured
Resource:
Class['sce_linux::utils::packages::linux::cron']
5.1.7 - Ensure permissions on /etc/cron.d are configured
Parameters:
set_cron_d_perms- [Boolean] - Default:true- If true, enforces permissions on /etc/cron.d.
Supported Profiles & Levels:
server, level_1server, level_2workstation, level_1workstation, level_2
Hiera Configuration Example:
What are tasks?
Modules can contain tasks that take action outside of a desired state managed by Puppet. It’s perfect for troubleshooting or deploying one-off changes, distributing scripts to run across your infrastructure, or automating changes that need to happen in a particular order as part of an application deployment.
Tasks in this module release
audit_approved_services_listening
Report only approved services are listening on a network interface
audit_authselect
Audit authselect profile for RHEL family systems version 8+.
audit_boot
Audit if the system is configured to boot to the command line or to the graphical user interface.
audit_check_ipv6
Audits IPv6 configuration on the host.
audit_client_dns
Audit DNS servers configured in /etc/resolv.conf
audit_duplicate_gid
Finds and returns duplicate GIDs in /etc/group
audit_duplicate_group_names
Finds and returns duplicate group names in /etc/group.
audit_duplicate_uid
Finds duplicate UIDs in /etc/passwd and returns the UID and all users that use it
audit_duplicate_user_names
Finds and returns duplicate user names in /etc/passwd.
audit_etc_shadow
Verify if /etc/shadow have empty password fields
audit_etcpasswd_groups
Finds groups that exist in /etc/passwd but do not exist in /etc/group
audit_firewalld_config
Returns the results of firewall-cmd --list-all
audit_for_emergency_accounts
Audit all accounts expiration dates for removal.
audit_journald_log_rotation
Report journald log rotation is configured per site policy
audit_journald_logs_to_rsyslog
Report journald is not configured to send logs to rsyslog
audit_kerberos_keytab_files
List all the keytab files on the system at /etc
audit_library_files
Audit library files permission, ownership, and group ownership
audit_mcafee_endpoint_security
Audit McAfee Endpoint Security for RHEL-family systems.
audit_no_execution_bit_flag
Audit for the no-execution bit flag on the system
audit_partition_crypto
Audit partition cryptography
audit_pkcs11_eventmgr
This task will report on whether the screen is locked or not when using smart card.
audit_pw_change_date
Returns the last password change date for all users
audit_selinux_user_roles
Returns the output of 'semanage user -l' on the target system
audit_sgid_executables
A short description of this task
audit_shadow_group
Finds and returns any users in the shadow group
audit_sshd_installation
Verify if sshd is installed
audit_sshd_status
Report sshd status
audit_sssd_certmap
Audit the existance of sssd certmap configuration
audit_sudo_authentication_timeout
Return the sudo authentication timeout in minutes
Change log
The changelog for SCE for Linux lives on the official documentation site.
Dependencies
- puppetlabs/stdlib (>= 4.13.1 < 10.0.0)
- puppetlabs/concat (>= 6.4.0 < 10.0.0)
- puppetlabs/inifile (>= 1.6.0 < 7.0.0)
- puppetlabs/augeas_core (>= 1.1.1 < 2.0.0)
- puppetlabs/firewall (>= 5.0.0 < 9.0.0)
- puppet/firewalld (>= 4.5.0 < 6.0.0)
- puppet/logrotate (>= 5.0.0 < 8.0.0)
- puppet/selinux (>= 3.2.0 < 5.0.0)
- puppet/systemd (>= 3.5.0 < 7.0.0)